User Manual

22
Step 5 Use finger or pencil to click and hold the center of the flickering cross . Do not release it
until
moves to the next positioning point. Complete the calibration process as instructed.
Step 6 After the calibration is complete, the Digitizer Calibration Tool dialog box is displayed.
Click Yes to save calibration data.

To ensure writing accuracy, you are advised to use the pencil released with the product for
positioning.

Positioning errors may cause failure of touch functions of the display. In that case, please perform
positioning again.
Step 7 The Tablet PC Settings dialog box is displayed again. Click OK. The positioning is
complete.