User's Manual

4
* See CAS 132-2006
If the product is mounted inside a wall or a cabinet, in addition to the above-mentioned
requirements, the area of ventilation holes at the bottom, top and two sides must be at
least 50% of the sealing surface to ensure proper ventilation.
Mounting Requirements
You can choose the potable or wall mounting method according to your
needs. Wall mounting can substantially save the space.
If you choose portable mounting, use the mounting rack or support. If you
want to use a self-made mounting rack, the bearing capacity of the rack
should be at last four times of the actual weight of the display. The bearing
capacity of the mounting support must be at least four times of the actual
weight of the display to ensure steadiness of the interactive panel.
When you choose wall mounting, the bearing capacity of the mounting surface
must be at least four times of the weight of the display. When the mounting
surface is a wall or ceiling of a building, the wall must be built with solid bricks,
concrete or materials of equal intensity. If you need to mount the display on
a loose surface such as an old brick wall, wood plank wall, solid brick wall,
metal or non-metal structure wall, or a wall with a thick decoration layer,
take necessary consolidating measures to ensure that the display is steadily
mounted.
Ventilation
requirements
Distance to the mounting surface (cm)
Nominal power Left and right side Top Bottom Back
Larger than 100 W 10 20 20 10
Bearing
9HQWLODWLRQ
Ventilation distance to the top surface should be over 20 cm
Ventilation distance to the bottom surface should be over 20 cm
Ventilation distance to the left
surface should be over 10 cm
Ventilation distance to the right
surface should be over 10 cm