User's Manual
3.5 Software Positioning
To ensure that the handwriting display works properly, you need to make the handwriting
shown on the display coincide with the actual handwriting. The highly accurate coincidence
can be achieved by software positioning. Software positioning must be implemented in the
following scenarios:
The first time to use the interactive handwriting LCD.
The driver program is reinstalled.
The handwriting display is connected to another PC.
The handwriting display adopts nine-point positioning method. The positioning process is
described as follows:
Step 1 Connect the display and run the drive program.
Step 2 Click the handwriting drive icon on the right bottom of the screen. The following
figure is displayed.