User's Manual

4.11 Temperature Reminder and Thermal Shutdown
Temperature Reminder
The real-time temperature in the interactive panel is displayed on upper left corner of the
home page. Click the temperature display area on the top-left corner of screen to switch
between Celsius and Fahrenheit.
Thermal Shutdown
In the running status, the overall temperature of the panel increases due to unfavorable
ventilation environment and long working hours. When the system detects that the actual
temperature is higher than the set value, the internal thermal shutdown is activated. Before
the panel is powered off, a reminder is displayed on the screen indicating that "The panel
is going to be turned off due to overheat".
Restoration Method to Thermal Shutdown
Restoration method: After the panel is connected to power supply correctly, press Reset at
the bottom of the rear of the panel to reset the panel. (If the thermal shutdown is activated
due to overheat, please improve the ventilation environment before you perform the
restoration.)
Som
e protection switches are turned off during long distance transport, which causes the failure to
start the panel. For first use, please power on the panel and then start installation based on the
preceding restoration method.