User's Manual
Table Of Contents
- NOTICE
- MountingRequirements
- Introduction
- BasicOperation
- AssembleOPSComputer
- Smartbar
- HomePage
- TaskManager
- WhiteBoard
- Gallery
- FileManager
- SystemSettings
- RestoreDefaultSetting
- Browser
- Programs
- SelectSignalChannel
- Menu
- ECOMode
- SerialPortControl
- SpecificationsofPCMode(VGAInput)
- FormatsSupportedbyUSBMode
- MaintenanceTips
- Specifications
46
Parent Control
The Parent Control menu shows options including Lock System, Set Password, Block Program, and
Lock Children. There are two ways to set it:
1.1 Click an icon and set it.
1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press
Back to quit the menu.
Note: This menu is only available when TV signal source is used.
ECO Mode
Press ECO on the remote controller to enter the ECO mode (ECO-Auto-Standard). Press this button to
switch among the three modes.
The power consumption will be halved under the ECO mode.
Under the Auto mode, the display will automatically adjust the brightness of the screen according to the
light from the environment. When the surrounding light is strong, the screen will bright up. When the
surround light is weak, the screen will darken.
Under the Standard mode, the screen brightness will stay the same.
Note: To save energy, please switch off the panel when it is used; and switch the panel to Alone when you do not
need to watch the display, thus cutting power consumption.