User's Manual
Table Of Contents
- NOTICE
- MountingRequirements
- Introduction
- BasicOperation
- AssembleOPSComputer
- Smartbar
- HomePage
- TaskManager
- WhiteBoard
- Gallery
- FileManager
- SystemSettings
- RestoreDefaultSetting
- Browser
- Programs
- SelectSignalChannel
- Menu
- ECOMode
- SerialPortControl
- SpecificationsofPCMode(VGAInput)
- FormatsSupportedbyUSBMode
- MaintenanceTips
- Specifications
43
Open Signal to show the following interface. Press ▲/▼ to select an option and press OK. You can also
click an icon on the interface.
Note: The interactive panel will automatically detect signals when it is started or there is no signal.
Menu
Press Menu on the remote control to show the menu (Image→Sound
Mode→Channel→Setting→Time→Parent Control). Scroll left and right on the screen or press ◄/► to
switch between options.
Picture
The Image menu shows options including Picture Mode, Color Temperature, Zoom Mode, Image Noise
Reduction, and MPEG Noise Reduction. There are two ways to set it:
1.1 Click an icon and set it.
1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press
Back to quit the menu.