User's Manual
Table Of Contents
- NOTICE
- MountingRequirements
- Introduction
- BasicOperation
- AssembleOPSComputer
- Smartbar
- HomePage
- TaskManager
- WhiteBoard
- Gallery
- FileManager
- SystemSettings
- RestoreDefaultSetting
- Browser
- Programs
- SelectSignalChannel
- Menu
- ECOMode
- SerialPortControl
- SpecificationsofPCMode(VGAInput)
- FormatsSupportedbyUSBMode
- MaintenanceTips
- Specifications
14
Software Calibration
To work normally, the handwriting of the projected image on the touch LCD display
should coincide with the actual one so as to calibrate accurately. The following situations need
calibration.
When you first use the interactive LCD panel;
Re-install the drive program;
When you connect the panel to another PC;
The handwriting panel adopts nine-point calibration method. The position process is described as follows:
1. Connect the display and run the drive program;
2. Click the handwriting drive icon on the right bottom of the display to show the following image:
3. Select Nine Points and click Calibrate.