Operating Manual

Laser focus tilt
ranging method 1:
Ruler ranging
3
-1
3
-2
Place the engraved object, adjust the height
of stand, and measure it with a ruler, so that the
bottom of machine is110mm from engraving
surface.
ranging method 2:
Red light focus ranging
Place the carving objects, adjust the height of the
electric bracket, and measure with a distance
ruler to make the distance between the bottom
of the field mirror and the object surface 115mm
before starting carving.
Long press to continu-
ous rise / short press to
rise 1mm
Long press to continu-
ous drop / short press
to drop 1mm
Height must
be 115mm
Height must
be 115mm