Operating Manual

Laserpecker 2 Expansionsachse
Gebrauchsanweisung
/Accessories list
01
Third axis addon
Secondary slider of
third axis addon
Mounting bracket
USB-C cable
Silicone bands
/ranging method
03
Ruler ranging
Height must
be 110mm
Height must
be 110mm
Height must
be 110mm
D istance from laser outlet to
the surface of engraved
object m ust be 110m m
Ranging by ranging rod
he bottom edge of rod contacts
the surface of engraved object.
Ranging by protective cover
Adjust the height so that the
bottom edge of protective cover
just touches the surface of the
carved object.
/indicator and interface instructions
02
Interface and indicator
Connection indicator
Power input
port
Power output port
Power supply /
control interface
(Directly connect
to the aser unit)
5V2A Power output
interface( for
the third axis)
Connection Diagram
Choose the right
size of silicone ring
Engraving smooth objects
Put two silicone rings on both ends of the object.
1
They prevent the object from skidding on the metal
rollers.
2
/Engraving mode-cylinder mode
04
Mode selection
This mode is used to rotate carved cylindrical objects. Select [cylinder] mode in APP, set the correct
distance 110mm ,preview engraving position , set proper power/depth and engraving size, then ready
to engrave.
In [cylinder] mode, if the cylindrical object surface is too smooth, Engraving with silicone rings. This mode is used to engrave small and flat objects. Select slab mode in APP, set the correct distance 110mm
,preview engraving position , set proper power/depth and engraving size, then ready to engrave.
This mode is used to engrave on large and flat objects. Select [trolley] mode in APP, set the correct distance
110mm ,preview engraving position , set proper power/depth and engraving size, then ready to engrave.
1
Open the third shaft
2
Select the cylinder mode
3
Mode selection
1
Open the third shaft
2
Select the flat mode
3
Mode selection
1
Open the third shaft
2
Select the trolley mode
3
/Engraving mode - Slab mode /Carving mode - trolley mode
05
06
After-sales service
We offer global online technical support
services for this product. If you encounter any
problems during your use, please feel free to
contact us and we will respond to you as soon
as possible.
Email ：[e-mail]
Tel.: [phone]
Facebook ：LaserPecker 2
Product Name：LaserPecker
Model：L2 Special Expansion Addon
Version number：2021-7A
Scan QR code to watch
instruction video
LaserPecker 2
VIP Group