Operating Manual

/Use safety guide
06
• Before starting the installation of LaserPecker 3, please first check that the equipment is intact and the laser mirror is clean.
• Installation specifications: Before operating LaserPecker 3, please secure the host referring to the Operation Manual (use the accessories
with fixing function (protective cover, electric support and third shaft) to support the objects) to avoid falling due to unstable placement.
• Please power the equipment with the power and type (adapter with 12V5A) as indicated in the operation manual.
• Before starting the laser carving, please make sure to take safety protection measures, such as adding protective covers, wearing goggles
to prevent eye or skin injury, removing irrelevant items to prevent unnecessary damage caused by laser irradiation, and especially removing
flammable and explosive items to prevent fire.
• After starting the laser carving, do not move the equipment, so as not to cause the equipment to stop working due to self-protection, or
even affect the final effect of the carving work because the carving objects are removed.
• To move the equipment or carved objects, please operate before the carving or after the carving is done. Do not move the equipment
or items during the laser work.
• Because of the risks of laser, do not bring minors, children, and people with close to the equipment at work.
• Before carving objects using this product, please check that the carved object will not release toxic or harmful gas during the laser burning
process to avoid poisoning accidents.
•If odor or smoke is found during the carving, please use the fan to blow away or place it in a spacious and ventilated place.
• Before carving objects using this product, review whether the carved objects have total reflection or diffuse properties. Special attention
should be paid to the safety protection of such objects (it is suggested to carving after blackening the carved area with the whiteboard
pen).
• Do not use LaserPecker 3 to directly illuminate the human body or pet skin and eyes, so as not to cause irreversible damage.
• Due to the limited power of LaserPecker2 laser components, it cannot carve metal, glass and other hard materials directly (some materials
can be carved after blackening with a whiteboard pen or processing by heat transfer layer and heat transfer paper).