User's Manual

⑦Output high-definition video signal through this interface, and can connect the
display, television, projector and other equipment.
⑧Connect the DC 12V-3A power adapter and the battery can be charged after
connection. If it is used for a long time, it is recommended to connect the adapter.
⑨ Display the picture through this screen, and can operate the detector through the
touch function at the same time.
⑩Open the battery compartment cover to replace the battery (Be sure to use the
battery provided by the original factory)
⑪ Image the visible light
⑫Image the heat source, and it is best that the lens and the temperature measuring
target are in the range of 1-4m when measuring the temperature
⑬Used for fixing the tripod
⑭Tie the lanyard here
⑮Connect computer equipment through this port to read the contents of the detector
and operate the TF card.
⑯Insert TF card into this slot, with maximum support of 128GB
10