Shenzhen Hi-Link Electronic CO.
Contents 1. PRODUCT INTRODUCTION................................................................................................................................. - 1 1.1. OVERVIEW........................................................................................................................................................ - 1 1.2. PRODUCT FEATURES..................................................................................................................................... - 1 2. DIAGRAM......
User Manual 1. Product Introduction Overview HLK-RM60 is a high-performance embedded WIFI6 module launched by Hilink Electronics. The module complies with IEEE standard 802.11a/b/g/n/ac/ax. The module integrates a 2.4G/5.8G radio frequency transceiver with a transmission rate. High characteristics. Product Features Compatible IEEE 802.11 a/b/g/n/ac/ax Dedicated high performance 32-bit RISC CPU Support 20/40MHz in 2.4G,Support 20/40/80MHZ in 5G Support 2.4g/ 5.
User Manual Specification Items Parameter Notes Model Number HLK-RM60 Main Chipset MT7621 Kernel MIPS1004Kc Main frequency 880MHz RAM DDR2 128MB Flash 16MB Temperature Ambient temperature: -20℃~+60℃ Using：10~95%（Non-condensing） Humidity Stock：5~95%（Non-condensing） Size 90mm×60mm Number of interfaces Interface Quantity Default firmware Support WiFi Standard IEEE 802.
User Manual Technical specifications Model Number HLK-RM60 Module Package In-line Wireless standard IEEE 802.11 a/b/g/n/ac/ax Frequency Range 2.4G Wi-Fi: 2412-2462MHz ; 5G Wi-Fi: 5150-5250MHz, 5725-5850MHz 802.11b: +18.99dBm 802.11g: +18.65dBm, 802.11a: +16.80dBm Transmit power 802.11n20: +23.69dBm, 802.11ac20: +19.64dBm 802.11n40: +21.48dBm, 802.11ac40:+20.00dBm Wireless 802.11ax20: +19.56dBm , 802.11ax40: +20.29dBm parameters 802.11ac80: +21.31dBm, 802.11ax80: +21.38dBm 802.11b: -88.
User Manual Application field Smart home； Instrumentation； Wi-Fi Remote monitoring/control ； Toy field； Color LED control； Intelligent integrated management of fire protection and security； Smart card terminals, wireless POS machines, handheld devices, etc. 2. Electrical parameters Working voltage Parameter Smallest Typical Max Unit Working voltage 3 3.3 3.6 V I/O Voltage 3 3.3 3.
User Manual 3. Pin introduction Figure 2.
User Manual Table 3. Module pin sorting 1:3.3VD 2:GND 39:ND_D2 40:ESW_TXVN_D_P1 77:I2C_SDA 78:GND 3:3.3VD 4:GND 41:ND_D1 42:GND 79:NC 80:ESW_TXVP_A_P4 5:3.3VD 6:GND 43:ND_D0 44:ESW_TXVP_A_P2 81:WDT_RST_N 82:ESW_TXVN_A_P4 7:3.3VD 8：ESW_TXVP_A_P0 45:ND_RB_N 46:ESW_TXVN_A_P2 83:ESW_P4_LED 84:ESW_TXVP_B_P4 9:3.
User Manual Power pin description： No. Name Type Function description Default function P 3.3V Input，Current≥1500mA Power Supply P Ground Power Supply 1 3 5 7 3.3VD 9 93 95 97 99 2 4 6 11 21 24 GND 42 60 78 96 98 100 USB3.0 Interface Description： 13 SSUSB_TX_P 15 SSUSB_TX_N 17 SSUSB_RX_P 19 SSUSB_RX_N 23 USB_D_N 25 USB_D_P USB3.0 I/O USB3.0 I/O USB 3.
User Manual SPI Interface Description： 29 ND_D7 SPI_HOLD GPIO#40 31 ND_D6 SPI_WP GPIO#39 33 ND_D5 SPI_MOSI GPIO#38 35 ND_D4 SPI_MISO GPIO#37 47 ND_RE_N SPI_CLK GPIO#36 55 ND_WE_N SPI_CS1 GPIO#35 49 ND_CS_N SPI_CS0 GPIO#34 I/O SDIO Interface Description： 51 ND_WP SD_WP GPIO#41 45 ND_RB_N SD_CLK GPIO#42 57 ND_ALE SD_CMD GPIO#44 53 ND_CLE SD_CD GPIO#43 I/O 43 ND_D0 SD_DATA0 GPIO#45 41 ND_D1 SD_DATA1 GPIO#46 39 ND_D2 SD_DATA2 GPIO#47 37 ND_D3 SD_DATA3
User Manual I2C Interface： 75 75:I2C_SCLK I2C_SCLK/GPIO#3 GPIO#3 I2C_SDA/GPIO#4 GPIO#4 I/O 77 77:I2C_SDA Network port P0 System reset： 8 ESW_TXVP_A_P0 10 ESW_TXVN_A_P0 12 ESW_TXVP_B_P0 14 ESW_TXVN_B_P0 Network port 0 ， Please leave it in the air if you don;t PORT0 Interface 16 ESW_TXVP_C_P0 18 ESW_TXVN_C_P0 20 ESW_TXVP_D_P0 22 ESW_TXVN_D_P0 need it Network port P1 Interface： 26 ESW_TXVP_A_P1 28 ESW_TXVN_A_P1 30 ESW_TXVP_B_P1 32 ESW_TXVN_B_P1 Network port 1，Please leave it i
User Manual Network port P3 Interface： 62 ESW_TXVP_A_P3 64 ESW_TXVN_A_P3 66 ESW_TXVP_B_P3 68 ESW_TXVN_B_P3 Network port 3，Please leave it in the air if you don;t PORT3 Interface 70 ESW_TXVP_C_P3 72 ESW_TXVN_C_P3 74 ESW_TXVP_D_P3 76 ESW_TXVN_D_P3 need it Network port P4 Interface： 80 ESW_TXVP_A_P4 82 ESW_TXVN_A_P4 84 ESW_TXVP_B_P4 86 ESW_TXVN_B_P4 Network port 4 ， Please leave it in the air if you don;t PORT4 Interface 88 ESW_TXVP_C_P4 90 ESW_TXVN_C_P4 92 ESW_TXVP_D_P4 94 E
User Manual Other Pins ： 59 NC Hang in the air Hang in the air 79 NC Hang in the air Hang in the air 27 NC Hang in the air Hang in the air Remark： 1，I-Input；O-Output；I/O-Number I/O；P-Power。NC Hang in the air。 4.
User Manual Wifi Light Fixing hole 5.8G wifi Ant 2.4G wifi Ant Connect port Network&Power light Figure 4 Module interface description 5. Indicator light description 2G/5G wifi indicator light: After turning on the wifi function, the module wifi indicator will flash, after turning off the wifi indicator, the module’s wifi indicator will go out. Pwr indicator: power indicator, always on when power on.
User Manual 7. Enter the configuration web interface Connect the computer's network port and the module's LAN port, open the computer browser, enter 192.168.16.254, and you will enter the web login interface, enter the user name: root, password: admin, and then click the Login button to enter the configuration interface. Figure 5.
User Manual 8.
User Manual In this interface, you can see the WiFi name and mac address of 2.4g and 5.
User Manual After the configuration is completed, click the following button to make the configured information take effect. Figure 10 Save Button Appendix A Document revision history Version V1.
User Manual FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
User Manual other transmitters, digital circuitry, or due to physical properties of the host product (enclosure). This investigation is especially important when integrating multiple modular transmitters where the certification is based on testing each of them in a stand‐alone configuration. It is important to note that host product manufacturers should not assume that because the modular transmitter is certified that they do not have any responsibility for final product compliance.
