Specifications

PRODUCT USE GUIDANCE
Turn on/off the Power
Wireless Charging
LED Lighting
Before using the product, please turn on the power switch to light up the LCD display, you can check the power of
the device, the remaining power percentage and the current power available time. It should be noted that you
need to press and hold the AC button for 2 seconds to use the AC output function. At the same time, all other USB,
DC ports and are plug and play. This battery has an energy saving function, it will automatically shut down if there
is no output for more than 3 minutes.
1. Press the power button to turn on.
2. No any load for 3minutes, the power station will automatically shut down.
3. If you need to shut down manually, please hold down the LED button and AC button at the same time for 5 seconds.
1.You need to turn on the power switch first
2.It can be used when the phone is placed correctly
1.Turn on the power first
2.Long press the LED button for 3s to turn on/off the LED light.
3.Short press the light button to adjust the brightness mode of the LED light.
Low→Medium→High
8