Specifications

USB/DC OUTPUT
DC INPUT PORT
LOW BATTERY ALARM
The USB output port is plug-and-play, please insert the electrical product into the corresponding interface to
automatically recognize and automatically output power.
Type-CPD outputs 36W according to the demand of the equipment standard (PD protocol matches the corre-
sponding fast charging protocol), and supports up to 45W output.
The output power of QC 3.0 is based on the demand of the equipment. QC3.0 supports up to 30W output.
The DC port output voltage is 12V and the maximum power is 36W. When the power is too high, it will be auto-
matically protected. The output can be automatically recovered after the high load is removed.
Please Note: The indicator of the corresponding plug port will be automatically displayed on the display screen
when each port works.
The input of the charging port(the nominal voltage is 16.8V 3.5A) please use the charger provided with this product.
When the battery is charging, the capacity bar of the display flashes in sequence and the LED charging indicator on
the charger after the battery is fully charged The lamp will turn green, please refer to the technical description for
charging parameters.
When the remaining battery is less than 20%, the buzzer will prompt "Beep" for 1 second, stop for 2 seconds. And it
will prompt for 5 consecutive times.
1.
2.
3.
4.
5.
12