Specifications

USB/DC Interface
AC Output Turn on/off
AC Standby Function
1.Turn on the power switch first, then all USB & DC sockets are plug and play.
1: Long press the AC button for 3s to enable or close the AC socket.
Note: For safety reasons, the AC power socket will automatically shut down after 3minutes of no-load standby and
when the load power is less than 5W.
This function not only prevents the AC power from automatically shutting down, but also supports AC to power
devices below 5W.
1.Please turn on the AC button first,then press LED light button twice shortly.
2.After hearing “Di” sound, “AC 110V” will blink on the digital screen. The AC Standby Function is ready to use.
3.Long press the AC button for 3s to turn off the AC socket.
Note： The AC standby function only can manually shut off. If not, the AC power function will always be on working
status until running out the battery power.
9
AC ON/ O FF
AC
LED
AC ON/OF F
AC