Smart heart rate bracelet Quick Tour Please read the manual carefully before use and keep it properly for future use
Contents Packing List…………………………01 Product Overview …………………01 Touch Control and Buttons…………02 Connect the Mobile Phone…………03 Charging……………………………04 Function Introduction………………05 Notes ………………………………11 Performance Parameter……………11 Frequently Asked Questions and Trouble Shooting ………………………………12
Packing List Host machine for the watch x1 Rubber watchband x1 Charger x1 Quick tour x1 Product Overview 1 .Power switch ○ 2 . TFT display ○ 3 .Watchband card ○ 4 . Wristband ○ 5 . Sensor ○ 6 . Charging port ○ ※ To make the measurement more accurate, please wear the watch on your wrist away from the carpus. Please attach it to your skin but not too tightly.
Touch Control and Buttons Slide downward: call the control center Slide upward: call the notification center Slide right: call the function menu Slide left: call the quick function Long press: call the display switch Power switch Power on: long press for 3s until the display is on. Power off: long press for 3s and select [power off]. Short press to make the screen on/off. ※ If you fail to start the watch after long pressing the power switch for 3s, please charge the watch and try again.
Connect the mobile phone Scan the QR code, download and install the App Download the App: for mobile phone with IOS, search 'FitCloudPro' in the App store. For mobile phone with Android, please search 'FitCloudPro' in other application stores (such as My app), and then download and install the App; or scan the QR code to download and install the App.
Charging Attach the magnetic charging wire to the metal contact of the charging port until the charging indication appears on the watch display. The device is an all-in-one machine. The back cover and the battery cannot be disassembled. Meanwhile, please pay attention to the following matters: 1. Don't open or bash the back cover. 2. Don't disassemble, replace or open the battery. 3. The disposal of the device and battery shall accord with the local environmental protection law.
Function Introduction Dial switch Long press for 2s on the home screen to enter the dial switch interface. Slide right and left to switch the dial for selection, and click to select the dial. ※ The first dial in APP dial library can be customized. Control panel Function overview: Do not disturb, setting, search for mobile phones, system information, brightness adjustment. Slide downward on the home screen to enter such function.
Sport Options for sport patterns: walking, running, mountain climbing, cycling, badminton, basketball and round-belly machine; Click the icon to start exercising. Heart rate You can open the regular detection on the App. The interface displays your heart rate on the same day; Enter this interface and it will automatically measure your single heart rate.
Blood pressure Enter the interface for blood pressure measurement. When the green light at the bottom is on, it will start measurement. The measurement will be completed within 30~60s. The measurement is based on PPG technology. Blood oxygen Enter the interface for blood oxygen measurement. When the green light at the bottom is on, it will start measurement. The measurement will be completed within 30~60s. The measurement is based on PPG technology.
Weather After you connect your watch with the APP and open the location permission, the weather interface will display the real-time temperature and weather type. Stop watch The interface is stop watch function. You can also set split time. Information Open information push on the App and the watch can receive the corresponding message. It can save up to 15 pieces of messages. If the number exceeds the upper limit, it will automatically cover the oldest one.
Find my phone Keep the watch connected to the APP, and click "Find my phone". The bell rings on your mobile phone and the watch shows that you have successfully found your mobile phone; If the watch is not connected to the APP, the watch will indicate that it is not connected. Setting Setting functions include screen display (dial switch, brightness control, duration of screen brightening, duration of screen brightening through palming), vibration strength, language, QR code and system setting.
Notification function Drinking reminder You can open this function through [device>drinking reminder] on the App. After it is opened, you can set the start time, end time and reminder interval. Sedentary lifestyle reminder You can open this function through [device>sedentary lifestyle reminder] on the App. After it is opened, you can set the start time, end time and the period for Do Not Disturb. Alarm clock reminder You can set and open the alarm clock reminder.
Notes 1 Please do not disassemble, repair or retrofit the product without authorization . ○ 2 Please do not crash the product with force, or else the product may be damaged. ○ 3 Please keep it away from high-intensity magnetic field, direct sun light or high ○ temperature. 4 The ○ product shall not be used for diagnosis, treatment and prevention of diseases. 5 The waterproofing grade of the product is IP68. Please do not immerse it in water ○ for long time. 6 Please do not keep the watchband too tight.
Frequently Asked Questions and Trouble Shooting Fail to start the watch Press the power switch for more than 3s. Maybe the battery level is too low. Please charge the battery timely. The blue teeth is not connected or cannot be connected Please restart the watch and connect again. Please restart the mobile phone blue teeth and connect again. Do not connect your mobile phone to other blue teeth device at the same time.
Why does the bracelet not receive notifications ? 5.1Android phone : When the user turns on the notifications switch for the first time , the App will ask for the corresponding permissions . Activate all the permissions needed . 9.0IOS phone : when the user turns on the call or message notifications switch , the system will automatically pop up the pairing request . The user needs to confirm the pairing .
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
