Multi-function wireless charger stand User Manual Made In China
1. iwatch charging area 2. Charging area for vertical mobile phone 3. Charging area for horizontal mobile phone 4. Mobile phone holder 5. Mobile phone charging indicator 6. Iwatch charging indicator 7. Airpods charging area 8. Airpods charging indicator 9. Heat-dissipating area 10.
Specifications Input Output Material 9V-2A，12V-2A 15W for mobile phone area, 2.5W for iwatch area, 5W for airpods area ABS How to use: Connect the USB cable and the indicator light will flash once and then go off after the device starts. At this time, the self-test of the device is completed. Press the Watch Pop-up button, and put on the corresponding device for charging.
Warning Please keep this product out of the reach of children. Please keep this product away from heat dissipating appliances such as radiators, or flammable and explosive items.
Do not use this product with wet hands or in wet Do not disassemble this product by yourself. In case areas. of technical assistance, please contact the supplier or hire a qualified repairer. Troubleshooting 1. When to reset In case the product is not used for a long time, the product will automatically enter into a sleep state, and in case it cannot be charged due to a sudden power failure, it can be restored after reconnecting the power supply. 2.
relevant metals and then charge again. If the failure is not removed, please unplug the power and restart this product for normal use. 3.Slow charging 1)Please use the adapter that supplied with this product, or other original adapters above QC3.0. 2)Check if the corresponding device is aligned with the charging coil.
FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
