User's Manual

earbuds from the charging case, turn on the Bluetooth function
on cellphone,search “HX2” and tap to connect it,Finish the
pairing and start to use.
3 Subsequent use
Take out the earbuds,they will re-connect to cellphone
automatically at the next time used in stereo mode.(Please
make sure the bluetooth function on your cellphone is open)
4 Mono mode
The“R”earbud can be used separately.
1:The first time when you use the“R” earbud, take out earbud
or power on earbud and wait for about 20s until the LED
indicator light flash red and blue, Tap the button,then turn on
“Bluetooth” on cellphone, search and tap “HX2”.
2 : If the“R” earbud has been paired mobile phone before, next
time when you use it singlely, just need to take out the“R”
earbud, the earbud will connect to cellphone automatically.
3:In Stereo mode,if just take out the“R” earbud,it can connect
to the cellphone automatically too.
Note: If want stereo mode again after mono mode(the“R” is
used alone), please delete the pairing.
Deleting pairing: Power off state,press and hold the buttons for
15 seconds, ( power on - > pairing - > lights flash Pink and blue