Operation Manual

08
Temperature
correction value
-5To + 5 ° C
Adjust to the correct room
temperature
0°C
09
Temperature
control mode
00: built in, 01:
external, 02:
dual
temperature
and dual
control
00: only enable the built-in
temperature sensor;01: only
enable external sensor for
temperature measurement;02:
temperature measurement with
built-in sensor and temperature
limit with external sensor
00
 Installation method of temperature controller:
1.Insert a screwdriver into the buckle in the groove at the top of the
thermostat, and then press the buckle down to separate the thermostat
from the iron plate.
2.Fix the iron plate in the wall box with two screws.
3.Connect wires and temperature sensing wires in strict accordance with
the wiring diagram on the back.
4.Align the thermostat with the fastening position on the iron plate and
press it down gently. A "click" sound indicates that the thermostat has
been installed.
5.If the thermostat needs to be removed, insert a screwdriver into the
groove buckle on the top of the thermostat, gently press the buckle
forward and take out the thermostat upward.
 be careful:
1. Please read the instructions carefully before use
2. Please strictly follow the wiring diagram on the power box on the back
of the product.
3. The thermostat can only be used for the purpose specified by the
company.Unauthorized modification and use of parts not sold or
Press the buckle to
separate the
temperature
controller from the
iron plate