User's Manual

Videos/photos/datas output
1.TV connections
The camera can transfer the video signal to an external monitor or the video
input of a television set. Please also follow the instructions of the respective
playback device.
1.1 Open the TV, connect the TV with the camera through date cable
1.2 Open the camera, and slide the operating mode selector switch to “SETUP”
1.3 After successful connection, the camera is connected to the TV, and the LCD
screen will turn black, and the captured picture will be displayed on the TV screen.
2.Transferring recordings to a computer
After the camera is connected to the computer and enters the removable
disk mode, a removable disk will be added in the “My Computer” window.
The captured photos or videos are stored in the “DCIM” directory of the
removable disk. There are two folders: MOVIE storage. The video file
recorded by the camera, PHOTO stores the captured image file, and enters
these two directories to copy the file to your computer's hard disk.
Note: In case of data loss, please don’t disconnect the cable or take
out the memory card when copying photos/videos.