User's Manual

Feelcare

This micro USB port is for uploading photos from USB drive only, it is not for

connecting computer. Photos in the USB drive can’t be displayed directly in the

frame, you have to upload/import photos from USB drive to the frame first. You

can export/copy photos from the frame to USB drive. Remarks: The usb flash

drive is recognized as “SD card” when it was inserted in the frame.

2. USB

3. RESET

Use a needle or paper clip to reset unit.

1. POWER

Use power adapter to power on the frame.

When it is on, press and hold power button for approximately 3 seconds to

access reboot or power off menu. Short press on power button will turn

off/onscreen (but leave the photo frame in on position).

Power off: To avoid any possible damage to the frame, please do not

unplug the power adapter from the frame directly, please always press

the power button for 2 seconds and tap “Power off” .