Operation Description

11.Activate the voice assistantHold down the headsetmultifunction button for 1.5 seconds to
activate Siri orGoogle's Voice AssistantControl phone operation.
pairingCommon(pairing mode)
1. Take it out from the charging bin or pressthe left and right multi-function button for 3
seconds tostart automatically pairing
2. 2. Activate Bluetooth on your phone or other device andtap to enter pairing
3. 3The two earphones can also be paired with a mobilephone. For details,go to Step
2Operation method
Perform operations.
Charging operation
1.Connect one end of the Micro USB charging cable to theUSB port of the charging box and the
other end to thechargerCharge the charging box, when the charging boxelectric quantity is in the
indicated range of thecorresponding indicator light, this positionThe whiteindicator light flashes
at an interval of 2 seconds until theelectric range of the indicator light is fullOn The indicatorthat
enters the next power range blinks.After the batteryis fully charged, all indicators are on.
2. Charge the earphone: put the earphone into thecharging bin to charge the earphone
automaticallyThelight is red and goes off when it is fully charged: the blueindicator light of the
charging bin keeps on (when thecharging bin is fully charged,The four electric quantityindicators
are all on. When the electric quantity of thecharging bin decreases to the corres ponding
electricquantity the corresponding refers toWhen the headsetisfully charged, the blue indicator
lights in the charging binare all off.
Warning:Changes or modifications to this unit not expressly approved bythe party responsible for
compliance could void the user’ sauthority to operate the equipment.
NOTE:This device complies with part 15 of the FCC Rules. Operation issubject to the following
two conditions: (1) This device may notcause harmful interference, and (2) this device must
accept anyinterference received, including interference that may causeundesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limitsfor a Class B digital device,
pursuant to part 15 of the FCCRules.These limits are designed to provide reasonable
protectionagainst harmful interference in a residential installation. Thisequipment generates,
uses and can radiate radio frequency energyand, if not installedand used in accordance with the
instructions, may cause harmfulinterference to radio communications. However, there is
noguarantee that interference will not occur in a particularinstallation. If this equipment does
cause harmful interference toradio or television reception, which can be determined by
turningthe equipment off and on, the user is encouraged to try tocorrect the interference by one
or more of the following
measures :
---Reorient or relocate the receiving antenna.