User's Manual

①
ON/OFF Switch: turns the mouse on and turn off.
②
DPI Switch: DPI can easily adjust the sensitivity 800 -1200 -1600 -2400 of mouse.
To change the setting, press the DPI button.
Pairing Steps
A. 2.4G Wireless Connection
Step 1. Flip the power switch to the ON position.
Step 2. Plug the 2.4G USB receiver into the port of computer (storaged in the slot of
back of keyboard.)
Step 3. Press directly of keyboard to switch to 2.4G wireless mode.
Step 4. Turn on the mouse.
Press Connect button directly of mouse to switch to 2.4G wireless mode.Ready to use.
NOTE : if connection fail, please follow below steps:
a. Keyboard re-pairing:
Step 1. Flip the power switch to the ON position.
Step 2. Long press “ + ” for 3 seconds meantime, the indicator will
flash green quickly.
Step 3. Immediately plug the 2.4G USB receiver into the computer within 10s
and keep the keyboard close to the receiver within 30cm (0.98 ft ).