User's Manual
F10
Search for
F10
Search for
Pairing Steps
Step 1. Insert 2 x AAA batteries ( not included ) into the keyboard.
Step 2. Slide the power switch to right to turn on the keyboard, then plug 2.4G USB
receiver into an USB port of the computer.
Step 3. Insert 1 x AAA batteries ( not included ) into the mouse.
Note: If connection failure , please follow below steps:
Keyboard re-pairing:
Step 1. Turn on the keyboard, press “Esc+Q” keys, the indicator flash quickly.
Step 2. Immediately plug the 2.4G USB receiver into the computer within 10s,
get the keyboard close to the receiver within 30cm (0.98 foot ).
Note: Re-pairing successfully, they work . If failed, repeat above steps again.
Power Saving Mode
The keyboard will enter sleep mode after being idle for 3 seconds.
Press any key to wake up.
Power Steps
If there is no light displayed at all, the battery is completely drained.