Wireless Keyboard with Touchpad For Surface Pro 8 & Surface Pro X User Manual
Pairing Instructions Step 1. Push the power button upward , the indicator will be on for 3 seconds and then be off. Step 2. Press “Fn+ ” keys together to enter pairing mode. The Bluetooth indicator will flash blue. Step 3. Go to your “Settings” screen on your tablets with Bluetooth –enabled device, activate its Bluetooth function and search for the keyboard device. Step 4. “Fintie EB335” should appear. Step 5. Select “Fintie EB335” on your device and the keyboard will now be paired.
Package Contents 1 x Wireless Keyboard with Touchpad 1 x Type-c Charging Cable 1 x User Manual Specifications Bluetooth Version Touchpad Operating Range Working Voltage Working Current (Backlight on) Working Current (Backlight off) Charging Current Sleeping Current Re-connect Time Stand-by Time Charge Time Uninterrupted Work Time with Backlight On Uninterrupted Work Time without Backlight On Lithium Battery Capacity Frequency Band Maximum Radio-frequency Power Battery Type Chemical Substances Product Over
①Power on/off: Push the power button upward to turn on, the indicator will be on for 3 seconds and then be off. To turn off, slide the power button to downward. ②Bluetooth pairing: Press “ Fn + ” keys together for pairing. ③Backlight on/off（Only for keyboard with backlight）. Keys and Function Press Fn key and hot key together to activate action.
Touchpad Press the “Fn+ ” keys to disable the touchpad mode; press the “Fn+ ” keys again, it will open the touchpad mode.
3-fingers slide up Open the window of Task browser 3-fingers slide Show Desktop down Set up the sensitivity of Touchpad Settings - Accessibility - Mouse pointer and touch - Mouse - Additional mouse settings - Pointer Options - Move "Select a pointer speed" to fast , tick "Enhance pointer precision" Trouble Shooting If your device doesn’t respond to the keyboard, try the following steps: 1. Restart your device. 2. Switch the keyboard off and back on. 3.
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
