User's Manual

Windows Mobile 5.0 and above
This keyboard may not be compatible with the Mac mini.
SPECIAL NOTE:
1.This keyboard doesn't support the Windows Mobile.
2. For Android users. The Caps Lock indicator may not light, but will still
function normally.
Pairing keyboard method
Step 1. On the keyboard, slide the power button on.
Step 2. Press the connect button, the Bluetooth indicator light will be blinking
blue.
Step 3. On the iPad, select: Settings- General- Bluetooth-On.
Step 4. The iPad will display “Bluetooth 3.0 keyboard” as an available device.
Step 5. Select “Bluetooth 3.0 Keyboard” on the iPad, click on it, the keyboard will
now be paired to iPad and the Bluetooth indicator will turn off.
SPECIAL NOTE
1. Only one device can be actively paired at one time.
2. After pairing for the first time, your device will connect to the keyboard
automatically when opening the keyboard.
3. In case of connection failure, delete the pairing record from your device, and try
the above procedures again.
Power Saving Mode
The keyboard will enter sleep mode when idle for 30 minutes.
To re-activate it, press any key and wait for 3 seconds.
Charge it
1. Plug the micro end of the USB charging cable into the keyboard.
2. Plug the USB end of the cable into a computer or charging adapter (not
included).If the red charge indicator light begins flashing during use, 4-hour
recharge is recommended.
Warning
1. Keep the keyboard away from sharp objects and liquids.
2. Do not place heavy objects on the keyboard.
3. Avoid extreme hot and cold temperatures.