User's Manual

Sleep Mode
The keyboard will enter sleep mode after remaining idle for 30 minutes.
To activate the keyboard, press any key and wait 3 seconds.
Pairing Instructions
Step 1. Turn on the keyboard’s power switch. The status indicator will light up for 2 seconds.
Step 2. Press the Connect button. The status indicator will start blinking.
The keyboard is now ready to connect to your device.
Step 3. Activate the Bluetooth function on your tablet ( Some tablets have a 'scan' button that you
need to tap).
Step 4. Locate and select 'Bluetooth 3.0 Keyboard' in your Bluetooth menu. The status indicator
light will stop blinking to indicate a successful connection.
NOTE:
1. For Android devices, please make sure that your device supports the Bluetooth HID profile or
the pairing will not work.
2. In case of connect failure, please delete the pairing the record from your device, and try the
above procedures again.
Caution
When not in use for a prolonged period, it is recommended that you turn off the keyboard to
lengthen the battery life.
Safety Tips
• Do not place heavy objects on the keyboard
• Do not dissemble the product
• Keep the product away from oils, chemicals, and organic liquids
• Clean the keyboard wet cloth
• Dispose of battery according to local laws
• Keep away from sharp objects
FCC Regulatory Compliance
changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,