User's Manual

ManualsBrandsShenzhen Hangshi Technology ManualsComputers & AccessoriesBluetooth Keyboard

Ultra-thin Wireless Keyboard

User manual

Package Contents

• 1 x Wireless Keyboard

• 1 x USB Power Cable

• 1 x User Manual

Buttons

On/off slider switch: Slide the switch to either on or off to power the device.

Once the on/off switch is set to on, press the Connect button to pair the keyboard with

your device.

Status Lights

Power Light: When the unit is initially turned on, the power light will turn on for a

few seconds then switch off.

Battery Indicator: A red light will turn on when the unit is charging. When the Charge

keyboard is fully charged, the light will turn off.

Bluetooth Status Indicator: When the connect button is pressed, the blue status light will

activate and slowly blink blue until the keyboard is paired.

CAPS Lock Indicator: CAPS lock is on when lit.

Charging

1. Use the included USB cable for charging. Connect one end to a USB charger, and the other to

the keyboard.

2. In charging, the power indicator will turn red. Generally, it takes approximately 2 hours for a

full charge. (charger is not included)

Summary of content (4 pages)

PAGE 1
Ultra-thin Wireless Keyboard User manual Package Contents • 1 x Wireless Keyboard • 1 x USB Power Cable • 1 x User Manual Buttons On/off slider switch: Slide the switch to either on or off to power the device. Once the on/off switch is set to on, press the Connect button to pair the keyboard with your device. Status Lights Power Light: When the unit is initially turned on, the power light will turn on for a few seconds then switch off.
PAGE 2
Specifications Bluetooth Specification Bluetooth 3.0 Operating Range Up to 33 feet or 10 meters Modulation System GFSK Standby time 90 days Charging time 2 hours Uninterrupted Work Time 90 hours Battery Type: Lithium polymer, Non-accessible Battery Capacity 280 mAh Battery Life 3 years Key Life 3 million clicks Keyboard Thickness 6 mm OS Supported Android Software required None Keyboard Shortcuts • For Samsung Android, press Shift + spacebar for language exchange.
PAGE 3
Sleep Mode The keyboard will enter sleep mode after remaining idle for 30 minutes. To activate the keyboard, press any key and wait 3 seconds. Pairing Instructions Step 1. Turn on the keyboard’s power switch. The status indicator will light up for 2 seconds. Step 2. Press the Connect button. The status indicator will start blinking. The keyboard is now ready to connect to your device. Step 3. Activate the Bluetooth function on your tablet ( Some tablets have a 'scan' button that you need to tap). Step 4.
PAGE 4
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.