User's Manual

1. EARPHONE LED INDICATOR
Earphone working mode
LED indicator status
Power on
White LED flashes 1 time
Charging
White LED turns on solidly
Fully charged
White LED turns off
Pairing
Right earphone flashes white LED 1 time
Left earphone flashes white LED for 5 seconds.
Reset
Click the earphones 8 times continuously.There will be no
voice reminder,but the both left and right earphones will
be disconnected and powered off.
2. CHARGING CASE LED INDICATOR
Earphone working mode
LED indicator status
Charging
White LED flashes 1 second
Fully charged
White LED turns on solidly
Low battery capacity
The last LED flashes white 1 time per 1 second
(there are 4 LEDs in total,every LED is equal to 25% power
capacity)
PAIRING
1.Long press earphone’s power button for 3 seconds until hearing “power on” voice
reminder,then release it.Both right and left earphones are re-connected and enter into pairing
mode for access Bluetooth device.
Right
earphone
Left
earphone