User's Manual

Shenzhen hailingke Electronico.,Ltd
Tel:[phone] Fax:[phone]
Page 30 / 31 Pages
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
End users must follow the specific operating instructions for satisfying RF exposure compliance.
Note 1: This module certified that complies with RF exposure requirement under portable or mobile or
fixed condition, this module is to be installed only in portable or mobile or fixed applications.
A portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of
the device is/are within 20 centimeters of the body of the user
A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to
generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained
between the transmitter's radiating structure(s) and the body of the user or nearby persons. Transmitting
devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices
associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter
separation requirement.
A fixed device is defined as a device is physically secured at one location and is not able to be easily moved
to another location.
Note 2: Any modifications made to the module will void the Grant of Certification, this module is limited
to OEM installation only and must not be sold to end-users, end-user has no manual instructions to remove
or install the device, only software or operating procedure shall be placed in the end-user operating manual
of final products.
Note 3: The device must not transmit simultaneously with any other antenna or transmitter.
No. Antenna Type Gain Impedance
1 PCB 1.5 dBi 50ohm
Note 4: To ensure compliance with all non-transmitter functions the host manufacturer is responsible for
ensuring compliance with the module(s) installed and fully operational. For example, if a host was
previously authorized as an unintentional radiator under the Declaration of Conformity procedure without a
transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that
the after the module is installed and operational the host continues to be compliant with the Part 15B