User's Manual

Shenzhen hailingke Electronico.,Ltd
Tel:[phone] Fax:[phone]
Page 27 / 31 Pages
URPort Set remote port
ULPort Set local port
UPL Set or query data length of automatic framing
UPT Set or query period of automatic framing
UPT2 Set or query Interval period of automatic framing
DP
Prefix data for UDP/988 port executes the at command
DE
UDP/988 port executes the at command enable or disable
Rb Reboot the module
ver version
Df Back to default setting
SO Socket open
SC Socket close
SL Socket check
SW Socket send
SR Socket read
DR Domain name resolution
GW GPIO write
GR GPIO read
TS Transparent ransmission change
mac Get mac address
Assid Softap SSID
Assidl Softap SSID length
Achan Softap wifi channel
Aam Softap encryption method
Apw Softap key
Apwl Softap key length
Aip Softap the module’s ip address
Note：The at instruction are case sensitive. "at" the two character is lowercase。
More details of AT Command,you can refer to:<< HLK-M35 AT Command V1.3>>