User's Manual

Shenzhen hailingke Electronico.,Ltd
Tel:[phone] Fax:[phone]
Page 24 / 31 Pages
Note：
HLK-M35 factory setting is Smart Config.When power on,you can use this tool to config
the module
3.3 Applications
3.3.1 Wireless remote control
In this application,the HLK-M35 in STA mode,connect to AP, the HLK-M35 serial connected to
user’s equipment. Mobile phone, PAD or computer is connected to the AP, and then through
the wireless network to control the user’s equipment.