User's Manual

Shenzhen hailingke Electronico.,Ltd
Tel:[phone] Fax:[phone]
Page 22 / 31 Pages
10,The serial port send:HLK-M35 SERIAL SEND to wifi,and the wifi received the data.The
TCP send:HLK-M35 TCP SEND to serial port and the RS232 port have received the data.
3.2 SmartConfig
1 Preparation work:Install“IoTManager_v0.96” on your
android phone .Then, power on the HLK-M35,Press the”Exit/Default” button at least 6 second,this
will make the module return to factory setting.
2，Open IoTManager,type in the target wireless router’s ssid and passwork, observe the
WIFI-LED blink two times out of a cycle,that means the module is in smartconfig mode,and then