User's Manual

Shenzhen hailingke Electronico.,Ltd
Tel:[phone] Fax:[phone]
Page 15 / 31 Pages
Fig11.TCP Client
In this mode, the HLK-M35 will connect the remote domain or ip. All TCP data is sent
directly to the serial port.Serial data is transmitting to the tcp server
Abnormal network disconnect can cause module active reconnection. When enable TCP
reconnection function, TCP Server active disconnected, module will immediately active reconne
ction, otherwise the module will not reconnect
UDP Server
Fig12.UDP Server
In this mode,Module will listen local udp port, Upon recevied data from this port, the dat
a will be sent to the serial port, and record the distal IP,Port.The module will only record the
last connection remote information. Serial receive data will be sent directly to the recorded di
stal IP, Port.
HLK-M35
TCP Client
TCP Server
HLK-M35
UDP Server
UDP Client