User's Manual

Shenzhen hailingke Electronico.,Ltd
Tel:[phone] Fax:[phone]
Page 12 / 31 Pages
HLK-M35 SoftAP topology
2.2 Work Mode: Transparent transmission
The HLK-M35 supports serial transparent transmission. This has the advantage of plug a
nd play serial, to reduce the user's complexity. Module in transparent transmission mode, the
user only need to configure the necessary parameters.After power on, module automatically c
onnect to the default wireless network and server.
Because in this mode, the module serial port always work in transparent transmission mod
e, so the user just use it as a virtual serial port. In short, the module is a wireless serial por
t, without any change,the user’s equipment can be easily add wireless data transceiver
Transparent transmission mode is fully compatible with the user's own software platfor
m, reduce integration of wireless data transmission software development. You should to cofni
g the below parameters at STA Manual mode:
 Wireless Parameters
 Target AP’s SSID and SSID’S length.
 Target AP’s encryption
 Target AP’s key and key’s length
 TCP/UDP parameters
 Network Protocol
 Remoto IP