Operation Notice

camera.
Install the battery in the right place of the battery slot correctly.
7.2 SD card installation
As indicated aside the card slot,insert the SD card into the the card slot with the
metal pins towards inside.(The camera is turned on after the SD card is installed)
Remove the card by pressing down.(The camera will turn off automatically when SD
card is removed out)
────────────────────────────────────
Notes：
Turn off the power before replacing card.

I
nsert card in the right direction.Do not insert the card too hard to damage the
card or camera components.If the card is not inserted,please check whether the
direction is right or not.
Format the card when the card is first used or used in other video cameras.
(In power on, double-click MENU button, enter the system settings, then
press DOWN button to find the “Format SD-card” menu, Click on the
"POWER(OK) "button, you will see “format card? All data will be deleted.
(yes or no)”.Or you can format the SD card on your computer).
────────────────────────────────────
7.3 Open Monitor
(1)The camera will be turned on by opening the LCD monitor.
(2)When the power is off, press the “POWER” button for 1 second and the camera
will turn on.
7.4 System menu setup
Double click the “MENU” button to open the main menu, press “UP / DOWN”
button to select main menu, and press “OK” to enter into sub-menu. In the sub-menu,
press “Menu” button to return to main menu,press it again will return to the start desktop.
1.Photo/Video setting menu.click this icon to enter the setting menu
2.UP
3.Current page/Total pages
4.DOWN
5.EXIT