Operation Notice

10. MIC INPUT
When
an
external
HS
microphone
is
needed,plug
the
external
microphone
into
the
MIC
interface
of
video
camera
to
record
video
or
audio
for
better
audio
effects.
11.
HD
OUTPUT
When
the
video
and
sound
of
the
video
camera
are
needed
to
output
to
the
HD
TV,
insert
the
public
port
of
the
HD
cable
into
the
HD
interface
of
the
video
camera,
and
connect
the
HD
input
port
to
the
HD
input
interface
of
the
HDTV.
Please
stop
recording
/
playing
videos
before
accessing
/
unplugging
the
HD
cable.
(switch
TV
signal
into
HD
mode)
12. Power OFF
Long
press
POWER
button
to
turn
off
the
video
camera.
When
the
video
camera
is
free
,it
will
turn
off
automatically
without
operation
in
more
than
1
minute(or
3minuts,or
5minuts
,as
set.)
so
to
save
power.
13.
Infrared
lamp
night
vision
When
the
light
is
insufficient
,press
OK
button
to
turn
on
the
function
of
night
vision.The
video
camera
can
normally
be
used
to
record
videos
and
take
photos
with
night
vision.
Note:Turning
on
the
infrared
lamp
will
increase
the
loss
of
battery.
14. Connect to a computer
Connect the video camera to the USB port on the computer with the USB cable; insert
the USB and the camera will automatically turn on;press UP and DOWN to select the
removable hard disk or PCAM or camera;then press OK to confirm entry.
When the camera is connected to computer,a removable disk will be added to the
window of MY COMPUTER.The recorded videos can be stored in the "Normal\ F"
directory on the removable disk and then can be copied to the hard disk of the computer
from the "Normal\ F" directory.
────────────────────────────────────
Note：Do not disconnect the USB connection while downloading files.Do not
plug memory card when USB is connected so to avoid data loss.
────────────────────────────────────
15. Camera maintenance
After using ,keep the camera in a dry and dark place and remove the battery.
● When using, keep wristband always covered with so to avoid sliding.
● Use proper protective case to avoid scrubbing lens and display screen.
● Use proper protector to avoid the lens and screen to be scrubbed.
● Blow dust and sands off the lens surface,then wipe gently with cloth or paper suitable