Instruction Manual
5
Installing / removing the lens hood
The lens hood can eectively reduce the diused light that can cause lens
halo and remake.
(1) Align the buckle marking lines ①② of the camera and the hood, and
turn in the direction shown by the arrow until they are locked ①③.
(2) To remove the hood, turn it in the direction opposite to the direction of
rotation during installation.
5.Set date/time
(1)Turn on the camera
Open the LCD screen, and the camera will turn on automatically.
If the LCD screen has been opened, press power button and then the
camera turn on.
Note: Do not deform the hood.
Make sure that the lens hood is aligned with the camera marking
line before turning.