Camcorder Instruction Manual 1
Preface Thank you for purchasing this digital video camera. Before use,please read this manual carefully.Keep this manual in a safe place for future reference. The latest information at the time of compiling this manual is used for reference for the content of this manual. The screen displays,illustrations and other information adopted in this manual are to visually elaborate the operation of the video camera.
Contents Getting Started 1. Check the camera and accessories.............................................1 2. Battery installation and removal and battery charging Installing / removing the battery.................................................1 Battery charging...........................................................................2 3. Memory card Usable memory card....................................................................3 Recording time of the memory card (estimated).................
Slowly mode / Lapse mode.........................................................11 Video pause...................................................................................12 Auto focus ....................................................................................12 Mic interface..................................................................................12 Fill light .........................................................................................13 Playback mode.................
Getting Started 1. Check the camera and accessories Standard list 2.
4K Battery charging This camera uses high capacity rechargeable external lithium battery. Please put the battery into the battery slot correctly according to the battery and battery compartment slot. (1) When charging with this camera, use USB line to connect the power adapter and the camera, and then connect the power supply to charge. When charging, the red light is always on, and the red light is off after fully charged. Tips: The camera will turn on automatically when charging.
3.Memory card Usable memory card This camera can use two types of memory cards, SDHC (Class10) and SDXC (Class10). Supports up to 256G. Recording time of the memory card (estimated) The estimated recording time is just for reference and the specific time may be different depending on the memory card and battery condition. Unit：Min Note: if the memory card has already stored videos or photos not taken with this camera, its remaining recording time will be shortened.
4K Installation of memory card Please insert the SD card into the card slot correctly. Inserting the wrong card may cause damage to the SD card and the card slot. 4.Install the handle/ lens hood Install the handle Slide the handle in the direction of the arrow, install it into the hot shoe holder of the camera, and then lock the handle button.
Installing / removing the lens hood The lens hood can effectively reduce the diffused light that can cause lens halo and remake. (1) Align the buckle marking lines ①② of the camera and the hood, and turn in the direction shown by the arrow until they are locked ①③. (2) To remove the hood, turn it in the direction opposite to the direction of rotation during installation. Note: Do not deform the hood. Make sure that the lens hood is aligned with the camera marking line before turning. 5.
4K (2) After turning on, press the MENU button to enter the menu bar, and then press the MODE button to switch to the system setting menu. (3)Then press the DOWN button to find the submenu-time format/ time setting/date setting, and press the confirm button to enter the corresponding submenu. (4) After the setting is completed, press the Mode button to exit the submenu setting. Note: The built-in clock of this camera may have errors, please adjust the time regularly. 6.
Basic operation of this camera Camera button function introduction 7
4K 8
Remote Control The remote control uses 2 AAA batteries . In the unobstructed environment, it can be remotely controlled for a distance of 20 meters. It can remotely control the camera from a 360-degree angle. Touch screen operation The camera has a touch screen function, which can be set by clicking the menu corresponding to the screen with your finger. Click the center area of the screen to switch on / off the screen menu.
4K Using the menu button Press the menu button to display the menu screen. You can change settings related to the camera as a whole, such as shooting and playback, and perform various functions.
Slowly mode / Lapse mode It is used to record the moment that cannot be captured by the naked eye (slow motion shooting), or shorten the long-time phenomenon to a short time for recording (fast motion shooting). It can record intense sports scenes, the moment when birds take off, the appearance of flower buds and the change of clouds and stars. The sound is not recorded.
4K Press the mode button, select Slowly mode / Lapse mode , and press the video button to start shooting. To finish shooting, press the video button again. Video pause This camera supports video pause. During the recording, press the Photo button, the recording is stopped and press the Photo button again, the recording is continued. If pressing the Record button again, the recording will end.
Fill light Short press the power button, the camera can turn on /off the fill light. Note: Turning on the fill light will accelerate the loss of battery power. Lighting distance 1.5 meters. Playback mode Press the playback button to enter the playback mode. You can browse videos and photos by controlling the dial wheel. To delete the corresponding video or photo, press the menu button and select Delete. Note: after deletion, it cannot be restored. Please operate with caution.
4K Auto shutdown setting You can set the time from when there is no operation to the automatic shutdown mode to prevent battery consumption. Enter the system menu to set, press the MENU button ⇒ MODE button ⇒ DOWN button ⇒ then find the Auto shutdown submenu, select the corresponding time (off/3 minutes/5 minutes/10 minutes). Reset Reset the camera to its default settings. Even if you perform [Factory Reset]. Note: Please do not unplug the battery during the factory reset.
(2)On your phone or tablet, turn on settings ------WLAN, find the WiFi name of the camera and enter WiFi password to connect the phone and the camera. (3) Turn off the WIFI function: In the WIFI connection state, press the UP button to cut off the WIFI signal source of the camera, and the camera returns to the normal state.
4K Connect computer Connect the camera to the available USB port on the computer with the USB cable. After inserting the USB cable, the camera will automatically turn on. Press the up and down keys to select the charging mode, storage mode or PC cam mode, then press the OK to enter. Storage mode When the storage mode is selected, a new removable storage device will be added in the“My Computer”window, which will transfer photos and video files to the computer.
TV, and cannot be connected to a computer. Please plug the public port ofthe HD cable into the HD interface of the camera, and connect the other end of the port to the HD input interface of the HD TV. Note that before connecting/unplugging the HD cable, please stop recording/playing the recording first. (The TV source needs to be adjusted to HD mode). The HD cable is suitable for the Mini HDMI to HDMI Cable.
4K (5) Keep the camera and battery out of the reach of children. (6) Do not heat the battery or expose it to sources of ignition (otherwise it may explode). Camera cleaning and maintenance (1) If you do not use the camera for a long time, take out the camera battery and place it in a dust-free, dry environment with a temperature no higher than 30 ℃. (2) In order to extend the service life of the battery, please discharge it completely before storage.
Trouble removal 19
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
