User's Manual

Connecting up the base

1. Plug the telephone line cord into the socket marked on the underside of

the base

2. Plug the power adaptor into the socket marked

on the underside of the

base and plug the other end into the mains power wall socket. Switch on the

mains power.

Installing and charging the handset

1. Remove the battery cover from the back of the handset and insert the 2 x AAA

NiMH rechargeable batteries supplied. Please note the ‘+’ and ‘-’ markings

inside the battery compartment and insert in the correct direction.

2. Slide the battery cover back into place.

3. If you are charging the batteries for the rst time, place the handset on the

charger to charge for at least 24 hours continuously.

4. When the handset is fully charged,

will appear steady on the display.

The display will show

HANDSET

and handset number (e.g. 2) to indicate that it is

registered to the base.

NOTE

If you have bought a multi-pack you will need to set up each handset and charger,

see page 11.

1.3 Bluetooth wireless technology

Your Colombo can be registered with up to 7 mobile phones via Bluetooth wireless

technology

but can only be connected to one mobile at a time.

A mobile that has been registered cannot be deleted manually, when an eighth

mobile is connected the oldest mobile will be deleted.

Once your mobile and Colombo are paired you can:

Getting started