User's Manual

44
10.2 Register a different make of handset to your Colombo base
IMPORTANT
DECT GAP Prole only guarantees that basic calling functions will work correctly
between different makes / types of handset and base. There is a possibility that
certain devices such as Caller ID will not work correctly.
On the base:
1. Press and hold for at least 4 seconds and the base will be ready
accept additional handsets. The base will remain in registration mode for 90
seconds.
On the handset:
Follow the registration instructions given in your handset’s user guide.
10.3 Select a base
You can register the Colombo handset with up to 4 bases. Once registered, you
can switch between bases, for example, bases at home and at work.
1. Press
Menu
, scroll to
Registration
and press
Select
.
2. Scroll
to
Select Base
and press
Select
.
3. All the base numbers are displayed.
(In use)
is shown beside the base number where the handset was previously
registered to. Scroll
or to the base you want and press
Select
.
4. The display shows
Searching Base X
. When registration is complete, the handset
returns to standby.
10.4 De-register a handset
Use one handset to de-register another. You cannot de-register the handset that
you are using.
1. Press
Menu
, scroll to Registration and press
Select
.
2. Scroll
to
De-register
and press
Select
.
3. Enter the System PIN and press
OK
. (default setting = 0000)
4. Scroll
or to the handset you want to de-register and press
Select
.
5. Press
Yes
to conrm or
No
to cancel.
6. Press
to return to standby.
Using additional handsets