User's Manual
39
9. Base settings
9.1 Dialling mode
The Colombo is preset to Tone dialling. It is unlikely that you need to change this
setting.
1. Press
Menu
, scroll to
Settings
and press
Select
.
2. Scroll
to
Set Base
and press
Select
.
3. Scroll
to
Dialling Mode
and press
Select
.
4. Scroll
or to
Pulse
or
Tone
and press
Select
.
5. Press
to return to standby.
9.2 Ring priority
When you have more than one handset registered to your base, you can set one
handset to ring before the other handsets. This allows one handset user to answer
all incoming calls rst, for example, the receptionist.
Choose
All Handsets
if you want all handsets to ring at the same time or
Select Handset
to nominate a handset to ring before the other handsets ring.
1. Press
Menu
, scroll to
Settings
and press
Select
.
2. Scroll
to
Set Base
and press
Select
.
3. Scroll
to
Ring Priority
and press
Select
.
4. Scroll
or to
All Handsets
or
Select Handset
then press
Select
.
If you choose
Select Handset
, all available handsets are displayed.
• Scroll or to the handset you want then press
Select
.
• Scroll or to the number of rings that you want to set:
2
,
4
or
6 Rings
and
press
Select
.
5. Press
to return to standby.
9.3 Recall mode
Recall is useful to access certain network services and PBX /
switchboard services.
The default recall mode preset in the Colombo is suitable for your country network
and therefore you should not need to change it.
NOTE
The use of the Colombo cannot be guaranteed on all PABX.
1. Press
Menu
, scroll to
Settings
and press
Select
.
2. Scroll
to
Set Base
and press
Select
.
3. Scroll
to
Recall Mode
and press
Select
.
Base settings