User's Manual
20
3.7 Receive a mobile call on the cordless handset
1. When you receive a call via your mobile phone the cordless handset will also
ring.
2. The cordless handset display shows the callers number or name if the
phonebook has been copied and a
will replace the icon.
3. Press
to answer the call.
NOTE
If Auto Talk mode is on, simply lift up the handset from its base to answer the call.
The default setting is On. If you have changed Auto Talk mode to Off, you will
need to press
to answer a call.
If Auto Talk mode is on, you will not be able to see the Caller’s details before you
answer the call.
NOTE
If you have subscribed to your Network’s Caller Identity service and assigned
a VIP Group to the caller’s number, the caller’s details are displayed before the
phone starts ringing. You can set your phone to give the default ringtone as soon
as the call is received then once the caller’s identity is displayed, the assigned
ringtone will start.
NOTE
An incoming call has priority over other events. Whenever there is an incoming
call, other operations in progress such as phone settings, menu navigation, etc.
will be ended.
3.8 Set the receiver volume
You can set your earpiece or hands-free volume via the handset menu. There are
8 levels to choose from.
1. Press
Menu
, scroll to
Setting
s and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll
to
Receiver Volume
and press
Select
.
4. Scroll
or to adjust the receiver volume level and press
Save
.
5. Press
to return to standby.
IMPORTANT
When the phone is ringing, avoid holding the earpiece too close to your ear as
it may damage your hearing. Hands-free activation can suddenly increase the
volume in the earpiece to a very high level. Make sure the handset is not too close
to your ear.
NOTE
During a call, you can also press
or to adjust the earpiece or hands-free
volume.
Using the phone