User's Manual
19
3. Using the phone
3.1 Switch the handset on / off
Press and hold to switch the handset on or off.
3.2 Make a call
1. Press .
2. When you hear the dialling tone, dial the telephone number.
3.3 Preparatory dialling
Once you have paired your Colombo with your mobile, you can make calls over
the xed line or mobile network using the Colombo handset, to pair the Colombo
with your mobile, see page 9.
1. Enter the phone number (maximum 24 digits). If you make a mistake press
Clear
.
2. Press
,
PSTN Call
is highlighted.
Either
3. Press
Dial
or to dial over the xed line.
Or
4. Scroll
to
Mobile Call
and press
Dial
or to dial over the mobile network.
3.4 Make a call using speed dial (keypad 1 to 9)
1. Press and hold a key from 1 to 9 until the number is displayed and dialled. If
no number is stored, you will hear a beep.
NOTE
To store a quickdial number, see page 27.
3.5 End a call
1. Press , or place the handset back on the base / charger.
After you hang up, the duration of your call is displayed for 5 seconds.
3.6 Receive a call from the xed line
When you receive an external call, the phone rings and
External Call
shows on the
display. If you subscribe to Caller ID the phone number will also display and if
the full phone number is in the cordless handset phonebook the name will be
displayed.
1. If the handset is off the base then press
to answer the call, or if the handset
is on the base simply lift the handset to answer the call.
Using the phone