User's Manual
40 Settings
Turning the blacklist feature on / o
1. Press
Menu
, scroll d to
Settings
and press
OK
.
2. Scroll
d to
Call settings
and press
OK
.
3. Scroll
u to
Advanced settings
and press
OK
.
4.
Blacklist
is highlighted. Press
OK
.
5.
Reject numbers in blacklist
is highlighted. Press
OK
.
6. The current setting is highlighted, scroll to either
On
or
O
and press
OK
to conrm.
7. Press o to return to standby.
8.2.5 Call time reminder
You can set the FW200L to give a reminder beep after a set amount of time during a call.
This can be set to o, to give a single beep or to beep periodically during calls.
1. Press
Menu
, scroll d to
Settings
and press
OK
.
2. Scroll
d to
Call settings
and press
OK
.
3. Scroll
u to
Advanced settings
and press
OK
.
4. Scroll
d to
Call time reminder
and press
OK
.
5. The current setting is highlighted, scroll
u or d to select either
O
,
Single
or
Periodic
.
If
Single
is selected, using the keypad set the time you want the reminder to beep
between 1 and 3000 seconds. Once activated, during a call you will here the beep
once at the requested time.
If
Periodic
is selected, using the keypad set the time you want the beep to activate
between 30 to 60 seconds. Once activated, during a call you will hear the beep at the
set time and then again when the set time comes around again. E.g if it is set to 40
seconds, you will hear a beep at 40 seconds, then again at 80 seconds and then again
at 120 seconds, this will continue throughout the call.
6. Press o to return to standby.
8.2.6 Answer mode
You can set the FW200L so that any button pressed can answer a call.
1. Press
Menu
, scroll d to
Settings
and press
OK
.
2. Scroll
d to
Call settings
and press
OK
.
3. Scroll
u to
Advanced settings
and press
OK
.
4. Scroll
d to
Answer mode
and press
OK
.
5. If the feature is switched on there will be a box with a tick next to
Any key
press
O
to
turn it o.
6. If the feature is switched o there will be a black box next to
Any key
press
On
to turn it on.
7. Press o to return to standby.