User's Manual

14 Using the phone
3. Using the phone
NOTE
Your phone will automatically time the duration of all external calls, the call timer will
display on the screen. When the call ends, the total duration of your talk time is shown for
1 second.
3.1 Inserting the SIM
Make sure the phone is turned o (see below) and not connected to the power when you
insert or remove the SIM card. Do not touch the metal plate area of the SIM card and keep
away from electromagnetic elds.
3.2 Switch the handset on / o
1. Press and hold o for 3 seconds to switch the handset on / o.
2. Once turned on the phone will search for the network. After the phone is registered
to the network, the signal will be displayed at the top left corner of the screen. The
phone is now in standby and you can make or answer a call. Your phone remains in a
searching state if it fails to nd the available network.
3.3 Calls
3.3.1 Make a call
1. Lift the handset or press h to make a hands-free call.
2. Dial the number .If you make a mistake press
Clear to delete the last digit.
Either press c to dial or it will dial automatically after a set time. To set the time for
automatic dialling, see “Delay dial” on page 41.
3.3.2 Preparatory dialling
1. Dial the number rst. If you make a mistake press
Clear to delete the last digit.
2. Lift the handset or press h to dial.
3.3.3 Make a call using speed dial keys
1. Press and hold the relevant keypad number to dial the pre-stored number directly.
NOTE
Key 1 will automatically be assigned with the voicemail number for your network provider.
Make sure the speed dial memory is set to on, see “Turn the speed dial memory on/o” on
page 18.
To assign a speed dial number, see “Store a speed dial memory number” on page 19.
3.3.4 End a call
Either press
End , place the handset back on the base or press h to end a hands-free call.
NOTE
If before the line connects, you decide that you want to end the call, replace the handset
on the base or press
Abort . To end a hands-free call press h or press Abort .