User's Manual
Table Of Contents
- Feature List
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- MESSAGE PLAY
- PHONEBOOK
- TAM SETTING
- SMS
- SETUP
- HANDSET
- REGISTER
- Answer machine features
- Base description
- Base unit operation
- Call answering and message recording
- Memory full
- Message playback
- Remote interrogation.
- Technical requirement
- Default setting data
- Setting for countries variance and type of product
- BPR detection (Branch Phone Detection)
- CPC (ECS) detection (End of call signal)
- Silence detection
- Tone detection
- DTMF detection
- AGC for recording
- Audio out put level setting
- Supervisory tone
- Tail cut
- Ring signal detection
- LED flashing
- Data storage
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
83 of 83
10 Specifications
10.1 CLIP Standards
The phone supports the following CLIP features defined by the identified standard:
Feature Country Standard
FSK type I All applicable ETS 300 659-1
FSK type II ETS 300 659-2
Note : No impedance matching is required
British Telecom S4005 Requirements for Caller Display Products, Version 1, February 2005
Telia, CID Requirement Specification, 1056-1B, 2001-01-12
Transfer of number information on analogue exchange line, incoming call, 8211 A-331 E, 92-12-14
Tele Danmark, PSTN Supplementary Services, Call Waiting with CLIP DTMF Supplementary
Services, TDK-TS 900 268, April 1998
Tele Danmark, Sending of A-subscriber number on B-Subscriber line in PSTN, TDK-TS 900 216, April
1998
Tele Danmark, User-network access protocol specification for MWI notification using DTMF signalling,
TDK-TS 900 231-2, April 1997
GFI 9502 “CLIP DTMF” Protocol 12.12.95
Telenor, FSK Signalling towards Analog PSTN interfaces, A21-1, Edition 2, 990812
Dutch Telecom, Calling Line Indication Presentation, T11-12E, 28
P
th
P
Sep 1995
KPN, Fixed Network Access Terminations, Part II, Analogue Network Terminations (PSTN), version
3.3, November 2003
10.2 DECT Specifications
The phone complies with the following standards
Part Standard
DECT Radio EN301 406
DECT GAP TBR 22
Analog Telephone Network TBR 21 and TBR 38
EMC EN301 489-1 and EN301 489-6
Safety EN 60950