User's Manual

2.4 Intercom mode
Refer to intercom
2.5 Incoming call mode
Refer to incoming call
2.6 MENU mode
Refer to MENU settings
2.7 Phonebook mode
Refer to phonebook
2.8 Redial list mode
Refer to redial features
2.9 CLIP mode
Refer to Caller ID (CLIP) feature
2.10 Charging mode
Refer to Charging conditions
2.11 VoiceMail
An indication is given to the user when voicemail is waiting, called the VMWI (Voice Mail Waiting
Indication).
VWMI notifications/de-notifications can be received from multiple voicemail servers. Matching of VMWI
notifications/de-notification will be done using the number field.
On receipt of a VWMI ‘ON’ message
- The VMWI notifications will be stored in the CID list.
- Each entry will show the CID of the voice mail server, including the box number if
provided.
- The name of the voice mail server, as sent in the 'Name' field will also be stored in CID,
along with the Date/Time of the call. The Name field can receive up to 50 characters, but
the display will be truncated to 12 characters.
- Note that no additional VWMI will be added to the list, if the server number is already
existing on the list, but in this case the date and time will be updated on the existing entry
in the CID list. The name field will also be replaced. It may contain the number of new
messages for the user
- The
icon will be flash.
- Note that the CID list will operate as a FIFO buffer. If the CID list is full, on receipt of a new
notification, it will replace the oldest non-VMWI item in the CID list.
- s the voicemail server, the user can press To acces
whilst the VMWI is displayed in
the CID list.
n receipt of a VMWI ‘OFF’ message
- ch already exists in the CID list, then the
- If the item does not exist on the list, then the de-notification will be ignored.
O
If the de-notification matches an item whi
notification will be removed from the list.
21 of 83