User's Manual

Tilt Storage Lock

AirCross S is equipped with a three-axes storage lock for

gimbal storage and leveling.

1.Unlock the pan storage lock, roll storage lock and tilt

storage lock to turn on the three-axes motor.

2.Rotate the roll arm 90° counterclockwise, and then lock

the roll storage lock.

1. Place the longer side of the quick release plate under

the camera, and secure the camera with a 1/4”screw.

2. Loosen the quick release plate lock knob, slider the

shorter side of the quick release plate into center of the

quick-release base, then lock the knob.

3. Fine-tune the quick-release plate back and forth until the

4. lens is horizontally forward, then lock the knob.

· Tilt Axis Leveling

Roll Storage Lock

Pan Storage Lock

Store and Expand the AirCross S

Mounting and Balancing the Camera

PdfEditor 4.0.0.14 Testversion - https://www.pixelplanet.com/de/pdfeditor/