Daim Ntawv Qhia Tus Neeg Siv
SEED
WHAT'S IN THE BOX
THE PRODUCT
BLUETOOTH PARIRING
First time pairing
When the speaker is powered on for the first time, it will automatically
enter the pairing mode and hear “Looking for device” voice prompt,
turn on Bluetooth on your device and connect to "233621
®
SEED".
Disconnect and reconnect
1. Manually disconnect and reconnect:
① If disconnected Bluetooth connection on the source device, the
SEED speaker will enter connectable mode for 20 minutes. SEED
will turn off when there is no source device connected.
② If SEED disconnects Bluetooth, it will enter the pairing state. If
there is no mobile phone connection within 5 minutes, it exits
the pairing state and enters the connectable state; if there is still
no mobile phone connection within 10 minutes, it will power off.
2. Remote disconnect and reconnect:
① After disconnect from the currently connected mobile phone and
returning to the valid connection range within 10 minutes, it will
be automatically reconnected.
② After disconnect from the currently connected mobile phone and
returning to the valid connection range within 10-20 minutes, the
device needs to be reconnected manually.
③ After disconnect from the currently connected mobile phone and
returning to the valid connection range after 20 minutes, it will
automatically power off and need to be restarted and then
reconnected.
Manual pairing (not the first pairing)
After powered on your SEED, Press ” ” and hear "Looking for device"
voice prompt to enter pairing mode. Manually disconnect the
speaker from the device and prompt "Bluetooth disconnected".
POWER ON/POWER OFF
INDICATOR STATUS DISPLAY
WARNING
Front indicator
1. Blue light flashing: The music is playing
2. Green light flashing: Charging (power 31%-100%)
3. Red light flashing: Low power (1%-30%)
Rear indicator
1. White light always on: The device is powered on.
2. Blue light flashing: Pairing mode.
3. Blue light always on: The Bluetooth connection is successful.
QUICK START GUIDE | USER MANUAL
SEED x1
Type-C Cable x1
User Manual x1
Top
Front
Rear
Open the cover at the back, and there is a
Type-C charging port and a 3.5mm audio
port: Type-c charging port to connect
5V/2A power adapter for charging 3.5mm
audio port to connect various audio
source equipment.
1. Press " ", Your SEED is on and hear “Power on” voice prompt.
2. Press and hold " " for 2 seconds, Your SEED will turn off and
hear “Power off” voice prompt.
3. Press " " for 5 seconds to reset the speaker.
CALL FUNCTION
1. Press " " to answer / hang up the call.
2. Press and hold " " for 2 seconds to reject the incoming call.
3. Press " " to control the call volume up and down.
4. Press and hold " " for 2 seconds to enable or disable mute mode.
MUSIC CONTROL
1. Press " " to play / pause music.
2. Press and hold " " for 2 seconds to next track.
3. Press and hold " " for 2 seconds to previous track.
4. Press " " to control the music volume up and down.
Do not push or press the passive driver
when the speaker is operating.